View CM1443-04CP_4970836.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

4-Channel EMI Filter Array with ESD Protection CM1443-04CP
Features
* * * * * Four channels of EMI filtering for data ports Pi-style EMI filters in a capacitor-resistorcapacitor (C-R-C) network +15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge) +30kV ESD protection on each channel (HBM) Chip Scale Package (CSP) features extremely low lead inductance for optimum filter and ESD performance 10-bump; 0.4mm pitch, 1.560 x 1.053mm footprint OptiGuardTM coating for improved reliability at assembly
Applications
* * * * * * EMI filtering and ESD protection for both data and I/O ports Wireless Handsets Handheld PCs / PDAs MP3 Players Notebooks Desktop PCs
* *
(c)2010 SCILLC. All rights reserved. April 2010 Rev. 2
Publication Order Number: CM1443-04CP/D
CM1443-04CP
PIN DESCRIPTIONS
PIN(s) NAME -04 A1 A2 A3 A4 B1-B2 C1 C2 C3 C4 FILTER1 FILTER2 FILTER3 FILTER4 GND FILTER1 FILTER2 FILTER3 FILTER4 Filter Channel 1 Filter Channel 2 Filter Channel 3 Filter Channel 4 Device Ground Filter Channel 1 Filter Channel 2 Filter Channel 3 Filter Channel 4 DESCRIPTION
Rev. 2 | Page 2 of 11 | www.onsemi.com
CM1443-04CP
Ordering Information
PART NUMBERING INFORMATION
Lead-free Finish Bumps 10 Package CSP Ordering Part Number1 CM1443-04CP Part Marking 43
Note 1: Parts are shipped in Tape & Reel form unless otherwise specified.
Specifications
ABSOLUTE MAXIMUM RATINGS
PARAMETER Storage Temperature Range DC Power per Resistor DC Package Power Rating RATING -65 to +150 100 600 UNITS C mW mW
STANDARD OPERATING CONDITIONS
PARAMETER Operating Temperature Range RATING -40 to +85 UNITS C
Rev. 2 | Page 3 of 11 | www.onsemi.com
CM1443-04CP
ELECTRICAL OPERATING CHARACTERISTICS (NOTE 1)
SYMBOL R CT CS VDIODE ILEAK VSIG PARAMETER Resistance Total Capacitance Single Capacitor Diode Voltage (reverse bias) Diode Leakage Current (reverse bias) Signal Voltage Positive Clamp Negative Clamp In-system ESD Withstand Voltage a) Human Body Model, MIL-STD-883, Method 3015 b) Contact Discharge per IEC 61000-4-2 Level 4 Clamping Voltage during ESD Discharge MIL-STD-883 (Method 3015), 8kV Positive Transients Negative Transients Cut-off frequency ZSOURCE = 50, ZLOAD = 50 At 2.5V DC At 2.5V DC IDIODE=10A VDIODE=3.3V ILOAD = 10mA 5.6 -0.4 Notes 2 and 4 30 15 Notes 2,3 and 4 +10 -5 R = 100, CS = 8.5pF 220 V V MHz kV kV 6.8 -0.8 9.0 -1.5 V V 5.5 0.1 1.0 CONDITIONS MIN 80 14 TYP 100 17 8.5 MAX 120 21 UNITS pF pF V A
VESD
VCL
fC
Note 1: TA=25C unless otherwise specified. Note 2: ESD applied to input and output pins with respect to GND, one at a time. Note 3: Clamping voltage is measured at the opposite side of the EMI filter to the ESD pin. For example, if ESD is applied to Pin A1, then clamping voltage is measured at Pin C1. Note 4: Unused pins are left open.
Rev. 2 | Page 4 of 11 | www.onsemi.com
CM1443-04CP
Performance Information
Typical Filter Performance (TA=25C, DC Bias=0V, 50 Ohm Environment)
Figure 1. Insertion Loss VS. Frequency (A1-C1 to GND B1)
Figure 2. Insertion Loss VS. Frequency (A2-C2 to GND B1)
Rev. 2 | Page 5 of 11 | www.onsemi.com
CM1443-04CP
Performance Information (cont'd)
Typical Filter Performance (TA=25C, DC Bias=0V, 50 Ohm Environment)
Figure 3. Insertion Loss VS. Frequency (A3-C3 to GND B2)
Figure 4. Insertion Loss VS. Frequency (A4-C4 to GND B2)
Rev. 2 | Page 6 of 11 | www.onsemi.com
CM1443-04CP
Performance Information (cont'd)
Typical Filter Performance (TA=25C, DC Bias=0V, 50 Ohm Environment)
Figure 5. Comparison of Filter Response Curves for CM1443 VS. DC Bias
Figure 6. Filter Capacitance vs. Input Voltage over Temperature (normalized to capacitance at 2.5VDC and 25C
Rev. 2 | Page 7 of 11 | www.onsemi.com
CM1443-04CP
Performance Information (cont'd)
Figure 7. Resistance vs. Temperature (normalized to resistance at 25C)
Application Information
Refer to Application Note AP-217, "The Chip Scale Package", for a detailed description of Chip Scale Packages offered by California Micro Devices.
Rev. 2 | Page 8 of 11 | www.onsemi.com
CM1443-04CP
Mechanical Details
4-Channel CSP Mechanical Specifications The CM1443-04CP-04CP is offered in a custom Chip Scale Package (CSP). Dimensions are presented below.
PACKAGE DIMENSIONS
Package Bumps Millimeters Dim Min A1 A2 B1 B2 B3 B4 C1 C2 D1 D2 Nom Max Min Nom Max Custom CSP 10 Inches
1.515 1.560 1.605 0.0596 0.0614 0.0632 1.008 1.053 1.098 0.0397 0.0415 0.0432 0.395 0.400 0.405 0.0156 0.0157 0.0159 0.195 0.200 0.205 0.0077 0.0079 0.0081 0.342 0.347 0.352 0.0135 0.0137 0.0139 0.342 0.347 0.352 0.0135 0.0137 0.0139 0.130 0.180 0.230 0.0051 0.0071 0.0091 0.130 0.180 0.230 0.0051 0.0071 0.0090 0.545 0.615 0.685 0.0215 0.0242 0.0270 0.378 0.419 0.460 0.0149 0.0165 0.0181 3500 pieces
Package Dimensions for 4-Channel CM1443-04CP Chip Scale Package
# per tape and reel
Controlling dimension: millimeters
Rev. 2 | Page 9 of 11 | www.onsemi.com
CM1443-04CP
CSP Tape and Reel Specifications
PART NUMBER CM1443-04CP04CP
CHIP SIZE (mm) 1.56 X 1.053X 0.615
POCKET SIZE (mm) B0 X A0 X K0 1.67 X 1.17 X 0.73
TAPE WIDTH W 8mm
REEL DIAMETER 178mm (7")
QTY PER REEL 3500
P0 4mm
P1 4mm
+
+
+
Figure 8. Tape and Reel Mechanical Data
Rev. 2 | Page 10 of 11 | www.onsemi.com
CM1443-04CP
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
Rev. 2 | Page 11 of 11 | www.onsemi.com

▲Up To Search▲

Price & Availability of CM1443-04CP

	To Download CM1443-04CP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .